The adapters come in standard versions – ULTRA 0.71x and XL 0.64x. Figures 1 through 3 below show MTF at 10, 20, and 40 lp/mm as a function of image height for output apertures of f/0.9, f/1.0, and f/2.0, respectively1. An additional stop down to f/2.0 yields performance that is rarely encountered in photographic optics. In addition, the speed of any attached lens is increased by 11/3 stops, with a maximum output aperture of f/0.80 when an f/1.2 lens is used. BRAW Shot at 48 FPS with the Sigma 18-35mm, Tiffen Black Pro Mist 1/4. At f/0.80 (i.e., with an f/1.2 master lens) the sharpness and contrast are extraordinary out to an image height of 5.1 mm, which is the limiting image height of the BMPCC4K camera’s FHD video mode. K 83. MTF Charts for the Spped Booster XL. There is no vignetting at all after the output aperture reaches f/3.42. That’s why Metabones releases new series of Speed Booster adapters especially designed for the BMPCC 4K. (MTF data is a full diffraction-based calculation that assumes the Speed Booster is attached to a perfect master lens having an exit pupil distance of 100mm. The slight falloff shown at f/2.8 is due to cos. Both versions – the Speed Booster ULTRA 0.71x and XL 0.64x – are available with Nikon G lens mount, with Canon EF lens mount and with Canon EF CINE lens mount. SmallRig Samsung T5 SSD Mount for BMPCC 4K/6K and Z CAM 2245B (Vancouver) $39. The Speed Booster XL 0.64x uses an advanced 7-element optical design to achieve extraordinary optical performance at apertures up to an incredible f/0.80. tax & shipping), Product Page: http://www.metabones.com/products/details/MB_SPEF-m43-BT8, Product name: Canon EF to BMPCC4K T Speed Booster® XL 0.64x, Dimensions: H 82.0mm x W 72.4mm x D 30.9mm, Product Page: http://www.metabones.com/products/details/MB_SPEF-m43-BT9, Product name: Canon EF to BMPCC4K T CINE Speed Booster® ULTRA 0.71x, Color: Black Satin and Satin Chrome exterior; Black Matte interior, Dimensions: H 90.3mm x W 86.0mm x D 31.8mm, Retail Price: USD 699.00 (excl. Just like the Metabones Speed Booster ULTRA 0.71x for BMPCC4K, the Speed Booster XL 0.64x is optimized to correctly account for the BMPCC4K camera’s specific filter stack located near the sensor surface. The new Speed Booster ULTRA 0.71x for BMPCC4K uses 6-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. The thickness of the camera’s filter stack is an important component of the overall optical design, and the re-designed optics ensure that both versions can achieve the same high performance as the Speed Booster versions for standard m43. 7 years ago by V Renée. Speed Booster® (winner of the 2013 TIPA Best Photo Accessory Award) makes lenses brighter, wider and sharper, and Smart Adapter™ breaks the lens mount compatibility barrier by electronically integrating interchangeable single-lens reflex (SLR) lenses and mirrorless cameras. Compatibility. As a result of this careful optimization, an enormous range of full-frame optics, ranging from vintage film lenses to the latest digital designs, will function flawlessly when adapted to BMPCC4K bodies. Note that as the master lens aperture is reduced to f/1.8 and then f/2.8 (corresponding to output apertures of f/1.1 and f/1.8, respectively) the performance improves everywhere, especially in the extreme corners. The 16mm will be closer to 30mm FF equivalent angle of view, as the crop factor with the BMPCC4K sensor is 1.9x. Waiting for my bmpcc 4k to arrive. 3 new 1 barely used BMPCC 6K Li-ion battery pack. The BMPCC 6K has a S35 sensor which produces a 1.588x crop factor when shooting in 6K. External controls give quick access to essential functions, while the large 5 inch touchscreen makes it easy to frame shots, focus accurately and change camera settings. KONDOR BLUE Speedbooster Bracket for BMPCC 4K Cage (Metabones or Viltrox) This bracket solves the issue many operators face when adapting lenses on the Blackmagic Pocket Cinema Camera and dealing with loose lens mounts with too much play. They cannot be attached to standard Micro 4/3 cameras (cannot be attached to GH4, GH3, GH2 and GH1 body). So it comes as no surprise that Metabones would redesign the lens adapter to better fit the unique nature of the BMPCC4K … They cannot be attached to any other m43 cameras such as JVC, Olympus or Panasonic cameras. While doing so, the adapter's optics help to maximize the connected lens's apparent angle of view while providing a 1-stop increase for the camera over the lens's aperture range. The Blackmagic Pocket Cinema Camera 4K features a 4/3 size sensor, 13 stops of dynamic range and dual native ISO up to 25,600 for HDR images and incredible low light performance. Note that the MTF calculations do not take into account sensor-induced apodization effects, sometimes called “pixel vignetting” or “pixel shading”, so actual results at large apertures are likely to be better than the calculations indicate. pocket cinema camera ... BMPCC + Speedbooster + M39 lens . Product name: Canon EF to BMPCC4K T Speed Booster® ULTRA 0.71x, Color: Black Satin exterior; Black Matte interior, Dimensions: H 82.0mm x W 72.4mm x D 31.4mm, Retail Price: USD 649.00 (excl. LucAdapters is a small Italian company, which specializes in optical focal reducers – also known as speed boosters. underwaterhousing. BMPCC Speedbooster on Pocket 4K 11-09-2018, 02:50 AM. At the maximum aperture of f/0.90 (i.e., with an f/1.2 master lens) the sharpness and contrast are extraordinary across the entire image circle. This way the camera and the Speed Booster can be mounted firmly on the same quick release plate. How are you satisfied with the optical quality? In addition to the new optical designs, the new series of Speed Boosters also features a longer tripod mount to perfectly match the height of the BMPCC4K camera body. The BMPCC4K Speed Booster adapters will be available starting in July 31st, 2019 from the Metabones webstore and its worldwide network of resellers. This way the camera and the Speed Booster can be mounted firmly on the same quick release plate. One of those adapters are Speed Boosters for micro four thirds cameras. In practice, what all of this means is that the new Speed Boosters will always enhance and never degrade the performance of the attached master lens. Metabones announced new series of Speed Booster adapters especially designed for Blackmagic Design Pocket Cinema Camera 4k (BMPCC4K). Figure 4 shows that there is only about 1 stop of corner illumination falloff even at f/0.8. It provides a magnification factor of … BMPCC 4k and MetaBones Speed Booster EF. If you didn't already know, the BMPCC 4K has a dual native ISO (400 & 3200), meaning that there are two analogue circuits on the sensor for the ISO. There is no vignetting at all after the output aperture reaches f/3.42. How are you satisfied with the optical quality? I will not dive too deep into the filter stack thickness topic here. MTF data is a full diffraction-based calculation that assumes the Speed Booster is attached to a perfect master lens having an exit pupil distance of 100mm. Speed Booster Adapters for BMPCC 4K. Here are again the MTF charts with commentary taken directly from Metabones website. All of the charts show the optical performance of the Speed Booster ULTRA 0.71x when mounted behind an ideal “perfect” lens. All of the charts below show the optical performance of the Speed Booster ULTRA 0.71x when mounted behind an ideal “perfect” lens. This one has been widely reported and really is a significant problem with the camera. 13 Stops of Dynamic Range. Speed Booster Nikon G Adapter for BMPCC 4K. For example, a 50mm f/1.2 becomes a 32mm f/0.80, which is the fastest aperture available for Blackmagic cameras. Want regular CineD updates about news, reviews, how-to’s and more?Sign up to our newsletter and we will give you just that. ... Blackmagic Design Pocket Cinema Camera 4K + MetaBones Speedbooster XL. $1,025.00 2 bids + $30.00 shipping . Figure 5 shows that rectilinear distortion added by the Speed Booster ULTRA is negligible at less than 0.7%. Aside: You know the anamorphic adapters have similar challenges as the SpeedBoosters. Picture quality is my main concern, but curious to hear other’s thoughts and experiences! Even the latest generation of ultra-high performance SLR lenses such as the Zeiss Otus series can be improved by adding a Speed Booster ULTRA 0.71x. Hey folks, can I use the old BMPCC Speedbooster (0.58x) on the new Pocket 4K without damaging the mount nor the sensor? Years ago, the company released the world’s first NX mount speed booster for the Samsung NX1 camera. The Canon EF CINE lens mount creates a positive lock for a secure electronic connection, and together with the matching length of new the tripod mount, allows for a rock-solid mechanical setup, which is important when using follow focus attachments. * Calculations based on the width of sensor in relation to a full-frame sensor. Metabones® Smart Expander™ Ensures Every EF Mount Lens Work on Fujifilm GFX, New Metabones® Speed Booster® & Smart Adapter™ for Fujifilm X Mount, Metabones® Introduces Nikon G Lens to Fuji G-mount (GFX) Expander 1.26x, Metabones® Introduces Canon EF to EOS R (RF mount) Speed Booster®, Metabones® Introduces Hasselblad V to Fuji G mount (GFX) Speed Booster®, New Series of Speed Booster for BMPCC 4K Camera, Firmware Pushes A7 Mark III Maximum AF-C Frame Rate up to 10 fps, Metabones Introduces EF to EOS M Speed Booster ULTRA 0.71x, Metabones Announces Blackmagic Pocket Cinema Camera 4K Support, Metabones Launches Contax N-Mount Speed Booster ULTRA and Smart Adapter, Metabones Devil's Speed Booster Q666 0.50x Press Release, Metabones Firmware Upgrade Adds Cinema EOS Lens and GH5 Support, Metabones Unveils Fifth-Generation Smart Adapters on Fifth Anniversary, Metabones® Explains the Significance of Its 'Native AF' Firmware in Relation to Its 'Ubiquitously Fast Autofocus' Vision, Metabones® Adds 'Native' AF and Smooth Iris to EF Mount Speed Boosters® and Smart Adapters™ by Firmware, Metabones® launches Smart Adapter™ EF-FZ Mount for Sony CineAlta cameras such as F5 and F55, Metabones® adds phase-detect autofocus (PDAF) support for Olympus OM-D E-M1 and Sony Alpha 7R2, Metabones Speed Booster ULTRA 0.71x M43 with Autofocus Press Release, Metabones Speed Booster XL 0.64x Press Release, Metabones Speed Booster ULTRA 0.71x Press Release, Metabones Nikon G to BMCC/BMPCC Speed Boosters Available Starting Today, Metabones® Introduces Third-Generation Smart Adapter™, Metabones and Caldwell Photographic Introduce Speed Booster, Metabones adds autofocus to Smart Adapter, Metabones Updates EF to E Mount Smart Adapter, Metabones and Conurus Create Canon EF to Sony NEX Smart Adapter™, http://www.metabones.com/products/details/MB_SPEF-m43-BT8, http://www.metabones.com/products/details/MB_SPEF-m43-BT9, http://www.metabones.com/products/details/MB_SPEF-m43-BTA, http://www.metabones.com/products/details/MB_SPEF-m43-BTB, http://www.metabones.com/products/details/MB_SPNFG-m43-BM4, http://www.metabones.com/products/details/MB_SPNFG-m43-BM5, http://www.metabones.com/products/details/MB_SPPL-m43-BT2. I wanted to test out the new BMPCC 4K, so I shot some footage while I was working on an indie feature filming at the Jamestown movie set in Langley, BC. Both versions are similar to the standard Micro four thirds Speed Booster adapters, but the optics have been re-designed to optimize for the filter stack thickness of the Blackmagic cameras, which is substantially thinner than that of standard M43 cameras.
Though made of high-quality optics, you can expect a relatively low cost on this lens. Adding the SpeedBooster Ultra and using the BMPCC4K to shoot UHD gives you about the same angle of view as the USA Mini 4.6K. 4K. Camera and adapter are in excellent condition, lightly used on two commercial shoots. tax & shipping), Product Page: http://www.metabones.com/products/details/MB_SPEF-m43-BTA, Product name: Canon EF to BMPCC4K T CINE Speed Booster® XL 0.64x, Dimensions: H 90.3mm x W 86.0mm x D 31.2mm, Product Page: http://www.metabones.com/products/details/MB_SPEF-m43-BTB, Product name: Nikon G to BMPCC4K Speed Booster® ULTRA 0.71x, Dimensions: H 80.7mm x W 68.2mm x D 34.0mm, Retail Price: USD 489.00 (excl. The NF-BMPCC Speedbooster (notice the P for Pocket) is only for use on the Blackmagic Pocket Cinema camera. Let us know in the comments underneath the article. Source: Metabones. The results are di… Source: Metabones. I’ve used it personally and it’s fine. Let’s start with the simple stuff, like prices (taken from B&H as of this writing): We chose the following: 1. This is especially critical at the extremely large apertures made possible by Speed Booster technology. The new Speed Booster XL 0.64x reduces the full-frame crop factor of the BMPCC4K as shown in the table further above. JLA FORUMS - … As I mentioned, this is especially critical at wide apertures (fully open). A 1.33x anamorphic adapter is similar to a 0.71x SpeedBooster. "Always at the forefront of innovation without ever setting aside practicality as a professional tool" perhaps best epitomizes Metabones' philosophy. Maybe it is the accent? Actual results will depend on the exit pupil distance and vignetting characteristics of the master lens used.). Figures 1 through 3 below show MTF at 10, 20, and 40 lp/mm as a function of image height for output apertures of f/0.8, f/1.1, and f/1.81. If you want to know more about it, there is a useful article on Lens Rentals blog about it. The T CINE Speed Booster XL 0.64x Adapter for Canon EF Lens to BMPCC 4K from Metabones allows a full-frame Canon EF-mount lens to be mounted onto a Blackmagic Design Pocket Cinema Camera 4K MFT-mount camera. While doing so, the adapter's optics help to maximize the connected lens's apparent angle of view while providing a 1.33-stop increase for the camera over the lens's aperture range. This is designed to work on our Kondor Blue cages but may also work on other mod Metabones Speed Booster XL 0.64x for BMPCC4K: Also this Speed Booster XL 0.64x adapter has been designed exclusively for the Blackmagic Pocket Cinema Camera 4K, with a magnification of 0.64x. Note: We are using ULTRA over XL because ULTRA is designed for APS-C lenses. The redesigned optics provide better sharpness when shooting with low aperture numbers. Optical performance of the new Speed Boosters is so good that the MTF of any lens attached to it will be improved. This is especially critical at the extremely large apertures made possible by Speed Booster technology. bmpcc 4k, bmpcc 4k review, bmpcc 4k footage, bmppc 4k review, bmpcc 4k why i sold, bmpcc 4k for beginners, best camera for beginner, bmpcc 4k raw. 19 Perhaps most exciting of all, in addition to increasing lens speed and field of view, the Speed Booster XL 0.64x offers amazingly high image quality even at extremely large apertures. The ARRI PL lens mount is available in ULTRA 0.71x version only. I'm aware that lenses attached via this old adapter won't fully cover the image circle. Do you use some kind of lens adapter with the BMPCC 4K? In particular, the Speed Booster ULTRA 0.71x is optimized to correctly account for the BMPCC4K camera’s specific filter stack located near the sensor surface. Here are the MTF charts with commentary taken directly from Metabones website. Exposure via false colour. The thickness of the camera’s filter stack is an important component of the overall optical design, and the re-designed optics ensure that the new Speed Boosters can achieve the same high performance with the BMPCC 4K as the Speed Booster versions for standard M43 do with other M43 cameras. Speed Booster ARRI PL Adapter for BMPCC 4K. 24. This item KONDOR BLUE BMPCC 6K Speedbooster Bracket Lens Support for Metabones Viltrox and BMPCC 4K/6K Pocket Camera Cages [New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203 Both cameras rated at ISO800. © 2021 All rights reserved. Source: Metabones. Speed Booster Canon EF Standard and Cine Adapters for BMPCC 4K. “glassless”) adapter on Blackmagic cameras. So I'm looking to buy either a 4K or 6K. Take Blackmagic 4K, 2.5K, & Pocket Cinema Cameras to New Depths with Nauticam UW Housings . Since day one the mount was a little loose, not big deal since I read is a normal problem and as I live abroad I can't send it back. The new design is specifically optimized to bring the same level of astonishing performance as the ULTRA Speed Boosters for Micro Four Thirds to users of the Blackmagic Pocket Cinema Camera 4K. Hey everyone! Aproveite o frete grátis pelo Mercado Livre Brasil! 4. Source: Metabones. Except the SpeedBooster gives you a one stop brighter image with higher line pair definition. The ARRI PL lens mount is available in ULTRA 0.71x version only. The Canon EF CINE lens mount creates a positive lock for a secure electronic connection, and together with the matching length of new the tripod mount, allows for a rock-solid mechanical setup, which is important when using follow focus attachments. At just one-third stop down to f/1.0 the performance is equal to or better than the best photographic lenses used at their optimum apertures. blackmagic. Copyright @ 2012-2020 Global Boom International Limited. The BMPCC4K Speed Booster ULTRA 0.71x and XL 0.64x are similar to the standard m43 Speed Booster adapters, but the optics have been re-designed to optimize for the filter stack thickness of the Blackmagic cameras, which is substantially thinner than that of standard m43 cameras. The adapters can only be used with the BMPCC 4K, they cannot be mounted on any other M43 camera. Note that this new 0.58x Speed Booster will only attach to BMPCC equipped with a Micro-4/3 mount. The BMPCC 4K Speed Booster adapters are now available for pre-order and the prices are between US $490 and $720 depending on the version. Metabones® offers a comprehensive range of adapters covering most popular lens mounts, as well as some rare and exotic ones. The new Speed Booster XL 0.64x for BMPCC 4K uses 7-element optical design to achieve high optical performance at apertures up to f/0.80 (with a full-frame f/1.2 lens). I wanted 4K and sharp lenses because I'd just come from shooting stills and I'd recorded 1080p with my Canon DSLR and found it way too soft and didn't realise that the fuzzy mess was Canon-related not 1080p-related. MTF Charts for the Spped Booster ULTRA. Extra for the BMPCC 4K: Metabones T Speed Booster ULTRA 0.71x Adapter (Amazon, B&H) or the Aputure DEC LensRegain (Amazon, B&H). Just stumbled upon this page and wanted to share some thought and ask some advice also.. Figures 1 through 3 below show MTF at 10, 20, and 40 lp/mm as a function of image height for output apertures of f/0.8, f/1.1, and f/1.81. 4 years ago by K. bmpcc. The BMPCC 4K Speed Booster adapters are now available for pre-order and the prices are between US $490 and $720 depending on the version. The Blackmagic Pocket Cinema Camera 4K features a native sensor resolution of 4096 x 2160, while the 6K model has a native resolution of 6144 x 3456. In fact, most lenses will have significantly improved MTF when used with the Speed Booster, compared to using them with a plain (i.e. Figure 4 shows that there is less than 1 stop of corner illumination falloff even wide-open at f/0.9. The new design for BMPCC4K makes very effective use of exotic materials at the furthest limit of glassmaking technology, and as a result is almost perfectly corrected for use with all full-frame SLR lenses regardless of aperture or exit pupil distance. Jakub has over 7 years of experience with camera work and post-production. Let us know in the comments underneath the article. speedbooster. Metabones or Viltrox Speedbooster adapters Gear used: BMPCC4k Passive adapter Carl Zeiss Jena 50mm f1.4 Rapido technology & RAF Camera adapters Hypergonar 16 STOP anamorphic scope Kowa 16s anamorphic scope Sankor 16d anamorphic scope shot at 4k dci, CinemaDNG Raw, cropped 2.76:1 All trademarks referened herein are the properties of their respecitive owners. Figure 5 shows that rectilinear distortion added by the Speed Booster XL 0.64x is negligible at less than 0.8%. I'm just afraiad to cause any physical damage to the camera. All handheld with a Tilta cage on a shoulder rig. Figure 1:  MTF at 10, 20, and 40 lp/mm for f/0.90               Figure 2:  MTF at 10, 20 and 40 lp/mm for f/1.0, Figure 3:  MTF at 10, 20, and 40 lp/mm for f/2                    Figure 4:  Relative illumination. The new Speed Booster ULTRA 0.71x for BMPCC4K uses an advanced 6-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. **Camera, lens and quick release plate are not included. But I'm a bit afraid of the whole mft-to-ef speedbooster thing. At the maximum aperture of f/0.90 (i.e., with an f/1.2 master lens) the sharpness and contrast are extraordinary across the entire image circle. Metabones Speed Booster ULTRA 0.71x for BMPCC4K: The new Speed Booster ULTRA 0.71x for BMPCC4K uses an advanced 6-element 4-group optical design incorporating ultra-high index tantalum-based optical glass. As a result of this careful optimization, an enormous range of full-frame optics, ranging from vintage film lenses to the latest digital designs, will function flawlessly when adapted to BMPCC4K bodies. on BMPCC 4k/6k Cinema Cameras. Figure 4 shows that there is only about 1 stop of corner illumination falloff even at f/0.8. 2.025x 0.71x = 1.438x crop! It uses Canon LPE6batteries and with the camera operating in typical settings they may only last around 35-40 minutes. ), (Illumination data assumes a perfect master lens with an exit pupil distance of 100mm and zero vignetting. There is no vignetting at all after the output aperture reaches f/2.82. In addition to the new optical designs, the new series of Speed Boosters also features a longer tripod mount to match the height of the BMPCC4K camera body. There is no vignetting at all after the output aperture reaches f/2.82. The new series of Metabones Speed Booster is especially designed for Blackmagic Design Pocket Cinema Camera 4k (BMPCC4K). Source: Metabones. Figure 4 shows that there is less than 1 stop of corner illumination falloff even wide-open at f/0.9. are pleased to announce a new series of Speed Booster for Blackmagic Design Pocket Cinema Camera 4K (BMPCC4K). Jakub Han is a freelance filmmaker based in Vienna. Beyond a Remote Control, Voodoo is also a very decent ... compatible with most modern M43 and native EF mount AF lenses, even through a speedbooster!) SmallRig 15mm Single Rod Clamp for BMPCC 4K/6K Cage 2279 (Vancouver) $23. This is especially critical at the extremely large apertures made possible by Speed Booster technology. [New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203 ... GH4 + Speedbooster + Sigma 18-35 1.8.